home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Magnum One
/
Magnum One (Mid-American Digital) (Disc Manufacturing).iso
/
d6
/
tfo330a.arc
/
READ.ME
< prev
next >
Wrap
Text File
|
1990-06-07
|
2KB
|
24 lines
THE FRONT OFFICE tm
You will require 640,000 characters of Ramdom Access Memory to run TFO. You
may install the Shareware version on either a hard disk or on a 720k diskette
laptop computer. The Commercial version will only run on a hard disk. In either
case type "install" from the A: prompt with diskette 1 in drive A. The instal-
lation program on the diskette will copy the files from each diskette, prompt-
ing you when to insert the remaining diskettes. Please pay close attention to
the directions as you proceed with the installation. In the case of 720k lap-
tops, be sure to have two (2) formatted disks ready with one inserted in drive
B:. After the files are copied type TFO to begin. Drive and directory titles
will be confirmed and the files will be initially indexed.
The TFO.BAT file has the line 'SET CLIPPER=V006;R132' in it. It reserves 132K
of RAM when TFO is delivered. This amount of RAM runs The Write Perspective in
RAM with TFO. You will need the CONFIG.SYS file to have two lines: 'BUFFERS=8'
and 'FILES=20'. Use The Write Perspective to check these files. Be sure to
reboot your computer after making any changes to your Autoexec.bat and Config.
sys files. If TFO will not run in your computers available memory: 1. Be sure
that no TSR programs are running. 2. Change the SET CLIPPER line to read 'R032'
and then use your own word processor with TFO. You need about 585,000 char. of
RAM to presently run TFO with The Write Perspective or with PC-Write 2.7., less
with other word processors. You can reach us on 603-938-2127. We also do custom
programming and consulting.